Research on performance optimization method of human-machine physical interaction system considering exoskeleton wearing comfort / 生物医学工程学杂志

In order to improve the wearing comfort and bearing effectiveness of the exoskeleton, based on the prototype and working mechanism analysis of a relaxation wearable system for knee exoskeleton robot, the static optimization synthesis and its method are studied. Firstly, based on the construction of the virtual prototype model of the system, a comprehensive wearable comfort evaluation index considering the factors such as stress, deformation and the proportion of stress nodes was constructed. Secondly, based on the static simulation and evaluation index of system virtual prototype, multi-objective genetic optimization and local optimization synthesis of armor layer topology were carried out. Finally, the model reconstruction simulation data confirmed that the system had good wearing comfort. Our study provides a theoretical basis for the bearing performance and prototype construction of the subsequent wearable system.

Mechanical Design and Research of Wearable Exoskeleton Assisted Robot for Upper Limb Rehabilitation / 中国医疗器械杂志

Based on the biomechanical mechanism of human upper limb, the disadvantages of traditional rehabilitation training and the current status of upper limb rehabilitation robot, a six degree of freedom, flexible adjustment, wearable upper limb rehabilitation exoskeleton design scheme is proposed. Firstly, the mechanics of each joint of the upper limb is analyzed, and the virtual prototype design of the whole mechanical structure of the upper limb rehabilitation wearable exoskeleton is carried out by using CATIA three-dimensional software. The tooth transmission of the forearm and the upper arm single row four point contact ball bearing with internal/external rotation and the shoulder flexible passive adjustment mechanism (viscoelastic damper) are innovatively designed. Then, the joints of the upper limb rehabilitation exoskeleton are analyzed, theoretical analysis and calculation of the driving torque, the selection of the motor and gearbox of each driving joint are carried out. Finally, the whole finite element analysis of the upper limb exoskeleton is carried out. The research and experimental results showed that the design scheme of the upper limb exoskeleton assist structure is highly feasible, which can help the patients with upper limb paralysis and motor dysfunction self-rehabilitation.

A pace recognition method for exoskeleton wearers based on support vector machine-hidden Markov model / 生物医学工程学杂志

In order to improve the motion fluency and coordination of lower extremity exoskeleton robots and wearers, a pace recognition method of exoskeleton wearer is proposed base on inertial sensors. Firstly, the triaxial acceleration and triaxial angular velocity signals at the thigh and calf were collected by inertial sensors. Then the signal segment of 0.5 seconds before the current time was extracted by the time window method. And the Fourier transform coefficients in the frequency domain signal were used as eigenvalues. Then the support vector machine (SVM) and hidden Markov model (HMM) were combined as a classification model, which was trained and tested for pace recognition. Finally, the pace change rule and the human-machine interaction force were combined in this model and the current pace was predicted by the model. The experimental results showed that the pace intention of the lower extremity exoskeleton wearer could be effectively identified by the method proposed in this article. And the recognition rate of the seven pace patterns could reach 92.14%. It provides a new way for the smooth control of the exoskeleton.

Effects of ankle exoskeleton assistance during human walking on lower limb muscle contractions and coordination patterns / 生物医学工程学杂志

Lower limb ankle exoskeletons have been used to improve walking efficiency and assist the elderly and patients with motor dysfunction in daily activities or rehabilitation training, while the assistance patterns may influence the wearer's lower limb muscle activities and coordination patterns. In this paper, we aim to evaluate the effects of different ankle exoskeleton assistance patterns on wearer's lower limb muscle activities and coordination patterns. A tethered ankle exoskeleton with nine assistance patterns that combined with differenet actuation timing values and torque magnitude levels was used to assist human walking. Lower limb muscle surface electromyography signals were collected from 7 participants walking on a treadmill at a speed of 1.25 m/s. Results showed that the soleus muscle activities were significantly reduced during assisted walking. In one assistance pattern with peak time in 49% of stride and peak torque at 0.7 N·m/kg, the soleus muscle activity was decreased by (38.5 ± 10.8)%. Compared with actuation timing, the assistance torque magnitude had a more significant influence on soleus muscle activity. In all assistance patterns, the eight lower limb muscle activities could be decomposed to five basic muscle synergies. The muscle synergies changed little under assistance with appropriate actuation timing and torque magnitude. Besides, co-contraction indexs of soleus and tibialis anterior, rectus femoris and semitendinosus under exoskeleton assistance were higher than normal walking. Our results are expected to help to understand how healthy wearers adjust their neuromuscular control mechanisms to adapt to different exoskeleton assistance patterns, and provide reference to select appropriate assistance to improve walking efficiency.

Rehabilitación temprana de fracturas de radio distal con ortesis robóticas. Reporte de Casos / Early rehabilitation of distal radius fractures with robotic orthosis. Case Report

Introducción Los exoesqueletos robóticos son una nueva alternativa para complementar los procesos de rehabilitación funcional de la muñeca, facilitando la terapia de movilización pasiva temprana posterior a eventos traumáticos locales, con el propósito de mantener o restaurar el arco articular mientras cicatrizan los tejidos o consolidan las fracturas. El objetivo del estudio es presentar los resultados de la terapia de movilización temprana de forma pasiva mediante ortesis robóticas de muñeca. Materiales y Métodos Se seleccionaron cuatro pacientes con fracturas de radio distal, quienes fueron tratados quirúrgicamente con reducción abierta de la fractura más osteosíntesis con sistema de placa de bloqueo volar, fisioterapia convencional y movilización temprana con la órtesis robótica PRO-Wix; además, se hizo seguimiento clínico de la funcionalidad (escala DASH), del dolor (escala EVA), de los arcos de movilidad articular (goniómetro), de la adherencia y los potenciales eventos adversos. Resultados todos los pacientes se reintegraron a sus actividades de la vida diaria luego de tres semanas de rehabilitación, se registró recuperación del arco de movilidad articular, disminución de la intensidad del dolor, recuperación funcional, adecuada adherencia y no se presentaron eventos adversos. Discusión conservar al máximo la anatomía articular en la intervención quirúrgica especializada es la base para iniciar la rehabilitación temprana, y permitirá que el paciente tolere la movilización pasiva con órtesis robóticas.

Background Robotic exoskeletons are a new alternative to complement the functional rehabilitation processes of the wrist, facilitating early passive mobilization therapy after local traumatic events, with the purpose of maintaining or restoring joint range of motion while the tissues heal. The aim of the study is to present the results of early mobilization therapy in a passive robotic wrist orthosis. Methods Four patients with distal radius fractures were selected, treated surgically with open reduction and internal fixation of distal radius fracture with volar plate locking system. Conventional physiotherapy and early mobilization with the PRO-Wix robotic orthosis was performed. Clinical monitoring of functionality (DASH scale), pain (VAS scale), joint mobility arches (goniometer), adherence and potential adverse events were carried out. Results all patients returned to their daily living activities after three weeks of rehabilitation. Recovery of normal wrist joint range of motion was achieved; decreased in pain intensity, functional recovery, adequate adherence to rehabilitation protocol and adverse events were also recorded. Discussion preserving the joint anatomy as much as possible in specialized surgical intervention is the basis for starting early rehabilitation, and allowing the patient to tolerate passive mobilization with robotic orthoses. Further studies including a wide number of patients have to be conducted.

Comfort optimization of a new type of foot mechanism for lower extremity exoskeleton / 生物医学工程学杂志

In order to reduce the impact caused by the contact between the foot and the ground when wearing the lower extremity exoskeleton under the condition of high load, this paper proposed an exoskeleton foot mechanism for improving the foot comfort, and optimized the key index of its influence on the comfort. Firstly, the physical model of foot mechanism was established based on the characteristics of foot stress in gait period, and then the mathematical model of vibration was abstracted. The correctness of the model was verified by the finite element analysis software ANSYS. Then, this paper analyzed the influence of vibration parameters on absolute transmissibility based on vibration mathematical model, and optimized vibration parameters with MATLAB genetic algorithm toolbox. Finally, this paper took white noise to simulate the road elevation as the vibration input, and used the visual simulation tool Simulink in MATLAB and the vibration equation to construct the acceleration simulation model, and then calculated the vibration weighted root mean square acceleration value of the foot. The results of this study show that this foot comfort mechanism can meet the comfort indexes of vibration absorption and plantar pressure, and this paper provides a relatively complete method for the design of exoskeleton foot mechanism, which has reference significance for the design of other exoskeleton foot and ankle joint rehabilitation mechanism.

Kinematics and workspace analysis of a spherical exoskeleton parallel mechanism / 生物医学工程学杂志

Based on the biomechanical simulation curve of OpenSim, an open source software of biomechanical model, a spherical exoskeleton parallel mechanism with two degrees of freedom for hip joint is proposed in this paper for the rehabilitation therapy of patients with impaired leg motor function or elderly people with walking dysfunction. Firstly, the parallel mechanism is modeled and the position inverse solution of the parallel mechanism is obtained using inverse kinematics analysis. The velocity analysis expression of the mechanism is derived by deriving the inverse kinematics solution. The model is imported into the mechanical system dynamics analysis software ADAMS and matrix processing analysis software MATLAB to carry out simulation experiments. The correctness of the velocity analysis is verified by comparing the velocity simulation results of the two methods. Then, three singular types of the mechanism are analyzed according to the obtained Jacobian matrix. According to the inverse solution of the mechanism, the reachable workspace of the mechanism is obtained by programming in MATLAB with given mechanism parameters and restriction conditions. Finally, the prototype platform is built. The experimental results show that the exoskeleton hip joint using this parallel mechanism can satisfy the requirement of rotation angle of human hip joint movement, but also can be good to assist patients with leg flexion-extension movement and adduction-abduction movement, and it is helpful to carry out corresponding rehabilitation training. It also has theoretical significance and application value for the research work of human hip exoskeleton parallel mechanism.

Construction and analysis of muscle functional network for exoskeleton robot / 生物医学工程学杂志

Exoskeleton nursing robot is a typical human-machine co-drive system. To full play the subjective control and action orientation of human, it is necessary to comprehensively analyze exoskeleton wearer's surface electromyography (EMG) in the process of moving patients, especially identifying the spatial distribution and internal relationship of the EMG information. Aiming at the location of electrodes and internal relation between EMG channels, the complex muscle system at the upper limb was abstracted as a muscle functional network. Firstly, the correlation characteristics were analyzed among EMG channels of the upper limb using the mutual information method, so that the muscle function network was established. Secondly, by calculating the characteristic index of network node, the features of muscle function network were analyzed for different movements. Finally, the node contraction method was applied to determine the key muscle group that reflected the intention of wearer's movement, and the characteristics of muscle function network were analyzed in each stage of moving patients. Experimental results showed that the location of the myoelectric collection could be determined quickly and efficiently, and also various stages of the moving process could effectively be distinguished using the muscle functional network with the key muscle groups. This study provides new ideas and methods to decode the relationship between neural controls of upper limb and physical motion.

Study on the influence of wearable lower limb exoskeleton on gait characteristics / 生物医学工程学杂志

The purpose of this paper was to investigate the effects of wearable lower limb exoskeletons on the kinematics and kinetic parameters of the lower extremity joints and muscles during normal walking, aiming to provide scientific basis for optimizing its structural design and improving its system performance. We collected the walking data of subjects without lower limb exoskeleton and selected the joint angles in sagittal plane of human lower limbs as driving data for lower limb exoskeleton simulation analysis. Anybody (the human biomechanical analysis software) was used to establish the human body model (the human body model without lower limb exoskeleton) and the man-machine system model (the lower limb exoskeleton model). The kinematics parameters (joint force and joint moment) and muscle parameters (muscle strength, muscle activation, muscle contraction velocity and muscle length) under two situations were compared. The experimental result shows that walking gait after wearing the lower limb exoskeleton meets the normal gait, but there would be an occasional and sudden increase in muscle strength. The max activation level of main lower limb muscles were all not exceeding 1, in another word the muscles did not appear fatigue and injury. The highest increase activation level occurred in rectus femoris (0.456), and the lowest increase activation level occurred in semitendinosus (0.013), which means the lower limb exoskeletons could lead to the fatigue and injury of semitendinosus. The results of this study illustrate that to avoid the phenomenon of sudden increase of individual muscle force, the consistency between the length of body segment and the length of exoskeleton rod should be considered in the design of lower limb exoskeleton extremity.

Recovery of Proprioception in the Upper Extremity by Robotic Mirror Therapy: a Clinical Pilot Study for Proof of Concept

A novel robotic mirror therapy system was recently developed to provide proprioceptive stimulus to the hemiplegic arm during a mirror therapy. Validation of the robotic mirror therapy system was performed to confirm its synchronicity prior to the clinical study. The mean error angle range between the intact arm and the robot was 1.97 to 4.59 degrees. A 56-year-old male who had right middle cerebral artery infarction 11 months ago received the robotic mirror therapy for ten 30-minute sessions during 2 weeks. Clinical evaluation and functional magnetic resonance imaging (fMRI) studies were performed before and after the intervention. At the follow-up evaluation, the thumb finding test score improved from 2 to 1 for eye level and from 3 to 1 for overhead level. The Albert's test score on the left side improved from 6 to 11. Improvements were sustained at 2-month follow-up. The fMRI during the passive motion revealed a considerable increase in brain activity at the lower part of the right superior parietal lobule, suggesting the possibility of proprioception enhancement. The robotic mirror therapy system may serve as a useful treatment method for patients with supratentorial stroke to facilitate recovery of proprioceptive deficit and hemineglect.

Study on an Exoskeleton Hand Function Training Device / 生物医学工程学杂志

Based on the structure and motion bionic principle of the normal adult fingers, biological characteristics of human hands were analyzed, and a wearable exoskeleton hand function training device for the rehabilitation of stroke patients or patients with hand trauma was designed. This device includes the exoskeleton mechanical structure and the electromyography (EMG) control system. With adjustable mechanism, the device was capable to fit different finger lengths, and by capturing the EMG of the users' contralateral limb, the motion state of the exoskeleton hand was controlled. Then driven by the device, the user's fingers conducting adduction/abduction rehabilitation training was carried out. Finally, the mechanical properties and training effect of the exoskeleton hand were verified through mechanism simulation and the experiments on the experimental prototype of the wearable exoskeleton hand function training device.